Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 114.119.134.79,10.179.80.203
Lock expires at: 2024/11/22 09:13 (14 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=== Topology ===


=== Configuration ===
Quick ppp multilink configuration:
  * sh ppp multilink

ints bundled into the multilink dont require an IP. DOES require:
  * PPP Encapsulation
  * PPP Multilink (turn on multilink)
  * PPP Multilink Group # (Multilink GROUP #)

The Mu interface we create must also belong to the same **''Multilink Group #''**

==R1==
<code>
interface Multilink1
 ip address 172.16.0.1 255.255.255.252
 ppp multilink
 ppp multilink group 1
!
interface FastEthernet0/0
 ip address 1.1.1.1 255.255.255.0
 duplex full
!
interface Serial1/0
 no ip address
 encapsulation ppp
 ppp multilink
 ppp multilink group 1
 serial restart-delay 0
!
interface Serial1/1
 no ip address
 encapsulation ppp
 ppp multilink
 ppp multilink group 1
 serial restart-delay 0
</code>

==R2==
<code>interface Multilink1
 ip address 172.16.0.2 255.255.255.252
 ppp multilink
 ppp multilink group 1
!
interface FastEthernet0/0
 ip address 2.2.2.1 255.255.255.0
 duplex full
!
interface Serial1/0
 no ip address
 encapsulation ppp
 ppp multilink
 ppp multilink group 1
 serial restart-delay 0
!
interface Serial1/1
 no ip address
 encapsulation ppp
 ppp multilink
 ppp multilink group 1
 serial restart-delay 0

</code>

Abrer_Wiki

User Tools

Site Tools

Page locked

Page Tools