Differences

This shows you the differences between two versions of the page.

--- icnd1:switchport_security [2024/05/01 00:51]
114.119.155.78 old revision restored (2023/10/11 22:08)
+++ icnd1:switchport_security [2024/05/21 02:45] (current)
114.119.145.194 old revision restored (2023/10/11 17:59)
@@ Line 12: / Line 12: @@
 ===== Configuration =====
 ----
-Switchport security cannot be enabled on dynamic port types.
+Switchport security
-  *Int FA01
-  *swport mode access
-  *enable port sec
-  *port sec max address to store is 1
-  *mac-addres stick, auto learn the next mac address on this port.
-  *violation mode set to shutdown.
-  *Show command to verify configuration on fa0/1.
 <code>
 Switch(config)#interface fastEthernet 0/1
-Switch(config-if)#switchport mode access
-Switch(config-if)#switchport port-security
-Switch(config-if)#switchport port-security maximum 1
-Switch(config-if)#switchport port-security mac-address sticky
-Switch(config-if)#switchport port-security violation shutdown
-Switch(config-if)#do show port int fa0/1
 </code>

Abrer_Wiki