User Tools

Site Tools


icnd2:spanning-tree

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
icnd2:spanning-tree [2024/04/24 10:04]
114.119.145.194 old revision restored (2023/11/10 05:33)
icnd2:spanning-tree [2024/05/15 02:53] (current)
114.119.138.183 old revision restored (2024/02/13 19:32)
Line 7: Line 7:
   * There can only be **one DESIGNATED port per SEGMENT/LINK. **   * There can only be **one DESIGNATED port per SEGMENT/LINK. **
   * Any port that is **not** **''DESIGNATED''** or a **''ROOT''** port, is then set to a **''BLOCKING''** state.   * Any port that is **not** **''DESIGNATED''** or a **''ROOT''** port, is then set to a **''BLOCKING''** state.
-Note that once a ROOT Bridge is elected, all other bridges will only forward HELLO BPDU's **originating** from the **''ROOT BRIDGE''**. The Root cost is incremented as the **''HELLO BPDU''** is **received (COST=$COST+$PORT_COST)**. The Root Cost **starts off @ 0** from the **''ROOT''**. Each subsequent Bridge tacks on it's **COST TO THE ROOT BRIDGE** as it is **received**.+Note that once a ROOT Bridge is elected, all other bridges will only forward HELLO BPDU's **originating** from the **''ROOT BRIDGE''**. The Root cost is incremented as the **''HELLO BPDU''** is **received (COST=$COST+$PORT_COST)**. The Root Cost starts off @ 0 from the **''ROOT''**. Each subsequent Bridge tacks on it's **COST TO THE ROOT BRIDGE** as it is **received**.
  
  
icnd2/spanning-tree.1713953062.txt.gz ยท Last modified: 2024/04/24 10:04 by 114.119.145.194